The Religions Of Shinto And Buddhism - 1079 Words

The two religions that are located in Japan are Shinto and Buddhism. The two religions in japan are extraordinarily unalike, while Shintoism believes that every living thing including rocks and sounds contain some type of god in them, and Buddhism is concerned with the soul and afterlife that happens in Buddhism. The religions differ very much from each other with little similarities. Buddhism and Shintoism differ in one using shrines while the other has temples, the two both have religious ceremonies, and one believes in the afterlife while the other does not. Shinto was originated in Japan and formed in five hundred BCE. Shinto â€Å"the way of the Kami† is the religion of Japan that was first used in the 6th century. Shinto has no founder, no sacred texts and no formalized system. Shinto is uniquely Japanese, and believes in a god named Kami, the Shinto believe that Kami exists both as spiritual beings but as well as in nature. The Kami is not like Western Religions, becaus e the Kami is not perceived as an all-powerful god, but as a creative force. Buddhism was formed in the 5th century B.C.E. in northern India. The religion was started by a man named Siddhartha Gautama, who is also referred to as the Buddha or the enlightened one. The way this man started the religion was by training his meditation for six years, and then once he felt he was close to â€Å"full enlightenment† he went into meditation and vowed not to come out until he reached full enlightenment. Buddha thenShow MoreRelatedThe Religions : Buddhism And Shinto1678 Words   |  7 Pagesformed. Religion is no exception; there have been many instances where religions have influenced each other and blossomed due to new ideas being presented. A good example of this the relationship between the two religions: Buddhism and Shinto. Buddhism was brought into Japan during the early 6th century from Korea, and was later institutionalized as the state religion in the late 6th century by Prin ce ShÃ… toku. The Prince was a great patron of Buddhism and by having made it the state religion, it wouldRead MoreHinduism, Buddhism, and Shinto1049 Words   |  5 PagesHinduism, Buddhism and Shinto, while vast in differences there is much to learn about these three religions similarities as well. Some facts and history of Hinduism include, Hinduism (being the oldest of the three) is dated back in pre-history before 10000 BC even believed to predate the Indus River Valley Civilization! The Vedas (the holy text of Hinduism) is the foundation for Indian culture and also the basic belief system of Hinduism. The basic belief structure of Hinduism is as follows, theRead MoreJapanese Scholars View of the Shinto Religion1110 Words   |  4 PagesThe Shinto religion is seen in two different lights by Japanese scholars. One is the view that the role of Shinto in Japanese history as a periphery religion and reliant on Buddhist ideals for its success. The other is that Shinto may seem to be a very primitive religion, but it has also maintained a long history of rituals and institutions that represent Japanese culture and its ability to absorb other religions and cultures. Both arguments are relatively strong, however I argue that ModernizationRead MoreEssay on Religions and Japanese Culture597 Words   |  3 PagesReligions and Japanese Culture Many religions are popular within the Japanese culture. Two of the most influential religions, Shinto and Buddhism that help shaped a lot of Japanese values are Shinto and Buddhism, played a large role in shaping Japanese values. Numerous similarities and differences run between these two religions; nonetheless, the Japanese often believe in more than one religion at the same time. This is possible due to the polytheistic nature of most popular religions inRead MoreEssay on Shintoism and Buddhism1210 Words   |  5 PagesShintoism and Buddhism The Japanese religions, including Shintosim and Buddhism, are rich and complex, and it contains many condradictory trends which may puzzle a Westerner. In the center of the tradition is Shinto, the natural religion of Japan. Also in the center is Buddhism, the Indian religion that was brought to Japan in the sixth century from Korea and China. Throughout the history of Japan, it has been these two religions that have contributed most to the Japanese understandingRead MoreEssay on Shintoism: Strengths and Weaknesses1117 Words   |  5 PagesThe Japanese culture has been greatly influenced by its religions, and one of the most influential religions has been Shintoism. Shintoism has been dated back to 500BC, when the descendants of the sun goddess, Amaterasu-OmiKami, worshiped the gods and goddesses of Japan. Shinto means way of the gods and that represents what people who practice Shintoism believe in. Shintoism is a religion based on Japanese mythology, which is centered on a mal e god, Izanagi, and a female goddess, Izanami. TheseRead MoreThe Night Watches Of The Buddha1747 Words   |  7 PagesQuestion 2 Analyze the night Watches of the Buddha, and explain how the content was developed in the Mahayana Sutras. Mahayana Buddhism is originated in the first century C.E. and focuses on new concern for liberation through the assistance of a bodhisattva (Voorst ). Also, Mahayana Buddhism requires a body of scripture, and so began the Mahayana Canon (Voorst ). Mahayana Sutras is one of section of the Mahayana Canon, which focuses on the denial of the reality of existence and nonexistenceRead MoreHealth Care Provider and Faith Diversity1394 Words   |  6 Pagesvery popular religions this writer will discuss the spiritual perspective on healing, the critical components of healing, and what is important to people of a particular faith when cared for by health care providers. The three religions that will be discussed are Sikhism, Shintoism, and Buddhism. This writer will also compare these faiths to the Christian philosophy of faith and healing. Health Care Provider and Faith Diversity The first of three religions that will beRead MoreSimilarities Between Shinto And Shinto Religion933 Words   |  4 PagesOf the many religions in the world, none are quite as unique as Shintoism. Shinto, meaning â€Å"the way of the kami†, is the indigenous religion of Japan. It is believed to have existed since the 6th century B.C.E. However, there is no documented origin nor is there an established founder. At the center of the Shinto religion is devotion toward various kami and the rituals performed to please them. It does not attempt to explain existence or the afterlife. Instead, Shintoism focuses on interactions withRead MoreShinto - A Japanese Religion Essay1687 Words   |  7 PagesShinto: A Japanese Religion Uncovering the religious significance and practices of Japanese Shinto As an ancient religion of Japan, Shinto was originally a combination of nature worship, divination techniques, and shamanism. Meaning the way of the Gods, the origins of Shinto are not apparent in comparison to other religions, especially other Asian religions and beliefs. With no obvious founder, as well as original written scriptures and authentic laws, a number of theories exist about the

Its All About Me - Free Essay Example

Sample details Pages: 1 Words: 370 Downloads: 3 Date added: 2017/09/11 Category Advertising Essay Did you like this example? Alam ko hindi ako tao dahil ako ay isang diyosa na nilikha ng Diyos para maghasik ng kagandahan dito sa mundong earth,, haha seriously speaking im the type of person na madaling makakapalagayan ng loob ng kahit sino halos masayahin ako masyado at friendly. mapagmahal ako sa family ko, sa GG q, sa mga friends at lalo na kay God chimpri naman,,,dapat lang.. actually mataas din yung pangarap ko sa buhay yung tipong maging basurera basurera ng pera.. Don’t waste time! Our writers will create an original "Its All About Me" essay for you Create order haha asta ang dami ksing pwedeng magdescribe sa akin at di mo yun malalaman hanggat di tayo nagiging close especially the torture pag kasama mo ako haha. jokz.. basta In the entire world there is no-one else exactly like me. Everything that comes out of me is authentically mine because I alone chose it. I own everything about me; my body, my feelings, my mouth, my voice, all my actions, whether they be to others or to myself I own all my triumphs and successes, all my failures and mistakes, because I own all of me. I can become intimately acquainted with me. By so doing I can love me and be friendly with me in all my parts. I know there are aspects about myself that puzzle me and other aspects that I do not know, but as long as I am friendly and loving to myself, I can courageously and hopefully look for solutions to the puzzles and for ways to find out more about me. However I look and sound, whatever I say and do, and whatever I think feel at a given moment in time is authentically me. If later some parts of how I looked, sounded, thought and felt turn out to be unfitting, I can discard that which is unfitting,keep the rest, and invent something new for that which I discarded. I can see, hear, feel, think, say and do I have the tools to survive, to be close to others, to be productive, and to make sense and order out of the world of people and things outside of me. I am me and I am okay. And MOST IMPORTANTLY I AM THE DAUGHTER OF GOD AND HE OWNS ME†¦.

Environmental Sustainability At Three Wine Making...

Introduction This report examines environmental sustainability at three wine making organisations. This is a qualitative research to explore how often the organisations provide concern related with environmental sustainability issues of a wine production. Interviews have used to collect information about environmental issues and activities to deal with the problems in the three companies. The interviews have produced amounts of contextual data that should be analysed to get key information related with the aim of research. NVivo10 is used to analyse the information about what prominent issues of the environment and effort to solve the problems in each organisation. Then, combining any significant issues across three organisations to conclude their focus on dealing with environmental sustainability. Result Environmental issues Analysis result shows that there are approximately eight environmental issues among the three organisations, such as water, climate change, biodiversity, waste, energy, ecosystem benefits, soil health, and erosion. Each organisation has slightly different of main environmental issues. Meanwhile, each organisation has different priority for each issues. Figure 1 displays concerned issue of environment in three wine making organisations. The decision of concerned issue is based on the how many times their mention the issues at the interview. Figure 1 depicts that water is the prominent environmental issue for all three organisations, but wine 1 giveShow MoreRelatedLuxury Brands: What Are They Doing About Social Responsibility?2488 Words   |  10 Pagesbrands have also discovered the value of being socially responsible. With growing criticism of the high costs and exploitation in the manufacture of luxury goods, some companies are increasing the extent to which corporate social responsibility and sustainability issues feature in their business practices. This paper will look at the issues regarding luxury brands and social responsibility, and will focus on LVMH Moà «t Hennessy Louis Vuitton, the world‟s largest luxury goods conglomerate. IntroductionRead MoreLuxury Brands: What Are They Doing About Social Responsibility?2480 Words   |  10 Pagesbrands have also discovered the value of being socially responsible. With growing criticism of the high costs and exploitation in the manufacture of luxury goods, some companies are increasing the extent to which corporate social responsibility and sustainability issues feature in their business practices. This paper will look at the issues regarding luxury brands and social responsibility, and will focus on LVMH Moà «t Hennessy Louis Vuitton, the world‟s largest luxury goods conglomerate. IntroductionRead MoreGreen Supply Chain Management3556 Words   |  15 Pages....................................................................................... 5 3.4 GSCM approaches and tools (Metrics, Criteria, Measures) ................................................................ 5 (i) Communicating Company sustainability policy and values .............................................................. 5 (ii) Pre-qualification Criteria .................................................................................................................. 6 (iii) PurchasingRead MoreThe International / Global Business Environment Essay3139 Words   |  13 Pagesbusiness environment and its influence on the manager s role. This complex role demands a contingency approach to dynamic environments, each of which has its own unique requirements.† (Deresky, 2010). Within the overall global environment, there are three subsections that global managers must understand comprehensively before they can expect to have success in any country. These are the operating environment, the host country environment, and the mega environment. Each of these are equally importantRead MoreGreen Marketing - a Research Proposal3353 Words   |  14 PagesProject FOX Fad or Expedient? - Perceptions of Consumers and Organisations on Green Marketing. Mieke van Kaam a research proposal – 22 April 2012 Table of Contents 1. Background 3 2. Problem statement 3 3. Research objectives 4 4. The scope and limitations of the proposed research 4 5. Literature review 6 5.1. Green fever –A load of Greenwash or not. 6 5.2. How green can you go? 7 5.3. Lets collaborate! 7 5.4. Consumer evolution 8 6. Research plan 9 6.1. Description of researchRead MoreMarketing Plan of Lux2484 Words   |  10 PagesLUX 1. Introduction * Description of the product Everything about the brand – from the look and feel of the products and packaging to the subtle fragrances – is a delight to the senses. In fact, Lux has been making waves since 1924, when it launched the worlds first mass-market beauty soap at a fraction of the cost of some expensive brands.   How it all started   * Lux was first introduced as a toilet soap in 1925. Produced by Lever Brothers, it arrived in the UK in 1928, offering peopleRead MoreAdnams Case Related to a Wake Up for Westminster Strategic Management3419 Words   |  14 Pageswake up for Westminster). This shows that pubs are struggling to operate, as the drop in consumers is significantly low. Furthermore, costs of running the pubs and materials have also increased. The ‘utilities cost have nearly doubled compared to three years ago.’ (A wake up for Westminster). Also considering the Government not helping on the cost side as the ‘beer tax escalator will further drive up the inflation. (9% beer duty increase)’(A wake up for Westminster). Looking at these statistics itRead MoreWoolworths Ltd Doing the Right Thing11796 Words   |  48 PagesDoing the right thing | Sustainability Strategy 2007–2015 Doing the right thing. Contents 2 3 4 7 8 9 0 1 2 1 8 1 0 2 2 2 4 2 6 2 8 2 Foreword What sustainability means to Woolworths Limited Our major commitments and targets Who is Woolworths Limited? Our external engagement Engaging our people Our sustainability priorities Climate change Water Sourcing Packaging Waste Green Stores Implementation and reporting All of us, every day. Foreword Read MoreThe Cork Industry, the Wine Industry, and the Need for Closure.† Answer the 10 Questions at the End of the Case5516 Words   |  23 Pages------------------------------------------------- Week 4: The wine industry amp; the need for closure Case study: The cork industry, the wine industry and the need for closure. Introduction This case study explores the use of cork as a way of sealing wine in a bottle; referred to as a closure in the wine industry. This 400 year old industry with all its associated working practices has continued largely unaffected by technology changes in almost all other industries- until that wasRead MoreThe Advantages and Disadvantages of Tea Production in Kenya, Malawi and Uganda in Relation to Fair-Trade3470 Words   |  14 Pagesmovement  and  market-based approach that aims to help producers in  developing countries make better trading conditions and promote  sustainability. The movement advocates the payment of a higher price to producers as well as social and environmental standards. It focuses in particular on exports from developing countries to  developed countries, most notably  handicrafts,  coffee,  cocoa,  sugar,  tea,  bananas,   Cotton,  wine, fresh  fruit,  chocolate  and gold. The concept of ‘fair trade’ has been around for over 40 years according

The Era Of The Common Man - 844 Words

The era of the common man was a period between, 1824 through 1848, described to be the era of wealth, hope and power. During this period Andrew Jackson s presidency helped United States grow as a nation and live up to the era’s name; through the economic developments, changing politics that benefited the common man, and different reform movements. The Tariff of 1828 commonly known as the â€Å"tariff of abominations† decreased the Southerners economy drastically. The Southerners had to pay for raw materials allowing the Northeast to prosper, by eliminating them from foreign competition. Jackson and his Democratic - Republican Party were able to use this to their advantage by luring colonist against the economic aristocracy that was growing in the Northeastern states. As â€Å"president of the common man†, Andrew Jackson believed economic aristocracy was blocking opportunities to the common man. Jackson also believed that his biggest enemy was the National Bank, managed by Nicholas Biddle. The National Bank had a wide range of power and Biddle planned to use this power on less well managed banks. Jackson in order to stop this â€Å"monster† pulled out all of the government s deposits going into the bank, he also refused to renew the bank s charter before 1836, causing a short depression. At the beginning of 1835 a nationwide economic boom was taking place. Canal, railroad building, and an abundance of land contributed to this economic increase, as a result of this the government wasShow MoreRelatedThe Era Of The Common Man897 Words   |  4 PagesThe â€Å"era of the common man† did not fully live up to its characterization on the means of economic development and by some democratic reforms such as office appointments. However, the politics aspect of the â€Å"era of the common man† did live up to its expectation by giving the common man a larger voice in politics and also with some other democratic reforms such as popular vote for presidential elections. The economic development in this time period was severely harmed by Jackson when he went afterRead MoreThe Era Of The Common Man1011 Words   |  5 PagesThe Jacksonian period has been regarded as the era of the â€Å"common man†, this characterization only holds true in regard to politics. Jackson’s action in economic development was little different from when this era began. His view towards reforms were threatening and unwanting. Jackson was relentless in his strive for presidency. Jackson lost his first presidential run to John Quincy Adams in 1824 despite having the popular and electoral votes. The Jacksonians (supporters of Jackson) called thisRead MoreThe Jacksonian Era Of The Common Man1561 Words   |  7 PagesThe Jacksonian period (1824-1841) is widely recognized as the era of the â€Å"common man†. To an extent, this statement is true due to the numerous political advancements that increased the rights of the â€Å"common man†. However, the political developments alone do not form a full picture of this period. In contrast with the progress in the political sphere, the economic developments during this era oppressed the people as America plunged into the worst financial depression it had seen to that pointRead MoreAndrew Jackson’s ‘Era of the Common Man’ or the ‘Jacksonian Period’ (1824-1845)1100 Words   |  5 PagesAndrew Jackson’s ‘Era of the Common Man’ or the ‘Jacksonian Period’ (1824-1845) starts at his inauguration, and ends as the Civil War begins. Jackson was the first president that was not born into wealth or education, but instead made his own wealth, and taught himself up to a prime education, a ‘self-made man’, as some may say, this and his military history made him the defining figure of his age. Although, he downplayed his past successes to make him more like the ‘common man’, and appeal to theRead MoreEssa y on 1920s Dbq823 Words   |  4 Pagesof revolutionary movements that would shift the everyday lives of American citizens and pave the way to the modern era. A struggle between old ideas of conservatism and new liberal movements surfaced during the â€Å"roaring twenties†. The new movements that began rearing their heads during this time period consisted of liberal political ideas, the advancements of rights for the common man and woman, and reforms to our social culture. One reason that tension was created during this time period was becauseRead MoreJeffersonian Republicanism vs. Jacksonian Democracy1441 Words   |  6 Pagesvery different eras, ranging from 1800-1808 and 1808-1840 respectively, that established two very different political philosophies. Each formed their own system that helped shape the way people think about American government. Liberalism is a political philosophy that goes against the established status quo at the time in order for change, where as a conservative is one which adheres to principles established by that same status quo. The Jeffersonian Republicans image of the common man was one vestedRead MoreInequality : Andrew Jackson Won The Presidential Election950 Words   |  4 Pagesfearless Jackson boasted; ‘a calm dose not suit me† (George Brown Tindall 442). His two terms in office was called the age of the common man. However, the Jacksonian democracy was actually the era of growing economic and social in equality. The growing gap between the wealthy and the poor and open racial behavior are two points that demonstrate how the age of the common man became instead the age of inequality. â€Å"While men of moderate means could sometimes turn an inheritance into a fortune by good managementRead MoreWilliam Shakespeare s The Elizabethan Era1548 Words   |  7 PagesAlthough the importance and presence of love in a person’s life over the ages has not changed, the role of love in one’s life has changed drastically in an individual’s personal life, specifically in marriage. During the Elizabethan era, it was â€Å"considered foolish to marry for love† (Ros). Fifteenth century marriage was seen as a means of gaining property, friends, and allies; therefore, marriages among wealthy landowners were more commonly arranged than those among people from lower classes. ManyRead MoreRealism And The Victorian Era859 Words   |  4 Pagesindividuals that are of different blood and social statuses fall in love? The Victorian Era was a time where your social status could be construed as directly correlating to whom said individual could socialize with, marry, or have any ties too. Perhaps maybe there weren’t three individuals that knew this more than the three of Wuthering Heights Edgar Linton, Catherine Earnshaw, and Heathcliff. The Victorian Era had many elements that could be tied to it but the one that will be the center focus forRead MoreThe Reconstruction Era And The Jim Crow Era1525 Words   |  7 PagesThe Reconstruction Era and The Jim Crow Era were both times of Rapid growth in the United States that were characterized by changes not only on the intrapersonal level, but also on the cultural and legislative level. The Reconstruction Era occurred directly after the civil war and spanned twelve years from 1865 to 1877 , while the Jim Crow Era occurred from 1877 to 1954. Some of the common themes of these eras were race relations and t ension between northern states and southern states. The first

Life should be taken care Free Essays

By looking at the above premises I reach to a solid conclusion; that no one should be allowed to ride in the truck of truck unless they have taken the necessary precautions, e. g. , having attained the proper age, or when the truck is but the only means of transport in a family and the speed at which the truck is traveling must be in agreement with the traffic rules. We will write a custom essay sample on Life should be taken care or any similar topic only for you Order Now Life should be taken care of, people must be willing to avoid accidents and injuries if they can be avoided, I truly look at riding at the back of a truck a mere way of inviting trouble. In cases where trucks (pickups) were involved in accidents and overturned the riders at the back were thrown out, this way permanent body injuries and/or death were inevitable. No-one should be allowed to ride in the back of a pick –up. There are always risks associated to this type of traveling and in the USA; this is one of the leading cause of deaths in accidents on the road. There are various ways by which this can be made a little bit safe but all in all it should really be banned. Think of a person below the age of 18 riding at the back of a pick up and see the possibility of falling off. Riders especially Kids who traveled in the back of a pick up more than often suffer from monoxide poisoning. It is so uncomfortable to ride in the back but teenagers find this as a way of having fun, rebelling, and teenagers will take advantage of this especially if the driver of the truck is not the owner and also when their parents are not near the scene. It is obvious that in case of an accident involving the pick up those at the back will get more injuries and even sometimes death may take place. If the pick-up rolls those at the back will be ejected out! It could then roll over them. The manufactures of these pick had the obvious reason for cargo transport not people. Traffic laws state that those who ride at the back of a truck should be above the age of 18, that a certain speed should be observed if a truck has people riding in its back but sometimes these laws are violated and for this reason it should be banned completely that for whatsoever there should be no – one riding at the back, I know that sometimes this may not apply as there are times that this may be the only way of transport for certain people but it is banned they will get alternatives as it is better to have a transport problem than try to heal injuries and/or encounter death. How to cite Life should be taken care, Essays

Demand and Supply of Copper-.com

Question: Discuss about the Demand and Supply of Copper in the Australian Market. Answer: Introduction Demand and supply of certain resources can determine the pricing of that particular resource in any given marketplace. Fundamentally, due to shift in demand and supply of a specific commodity, prices may seem to have fluctuated. However, there are a number of factors that can affect the entire supply and demand status of a commodity (Krugman and Wells, 2013). The identified study paper has been developed to discuss how supply and demand scenario of copper has affected the price of the commodity in the Australian market. Precisely, the surging demand for copper in the Australian market and its impact on the copper miners and investors has been discussed throughout the study. According to the article written by McHugh (2017), the increasing demand for electric vehicles (EV) and renewable energy is driving the demand of copper in the Australian market. Similarly, by following the fundamentals of economies, surging demand of the red metal is boosting the prices of the commodity. Meanwhile, the rising demand of the metal spells great news for the miners as well as the investors involved in the Australian copper mining industry (Schlesinger, 2014). As per the market analysis, the study evaluates some of the strategies to be followed by the major players attached to the industry. Analysis and Discussion The transformation around the global automobile industry has brought a significant boost for the copper industry. As the popularity of electric vehicles is rising day by day, the demand for the red metal is surging as well. Evidently, the rotary motors used in EVs can use up to 4 times the amount of copper than conventional combustion automobile engines (McHugh, 2017). Therefore, increased demand for EVs can create a massive demand for copper as consumption of the red metal will be higher in the automobile industry. Apart from that, to run the EVs and develop the charging infrastructure, the role of copper is huge. Besides, the development of renewable energy sector has also contributed towards the surge in demand for the commodity (McHugh, 2017). In order to generate renewable energy, the requirement of copper will be four times greater than the coal-powered energy plants. By following the recent trend, the consumption of copper will be higher leading to demand growth of the commodi ty. Currently, the market for copper requires 26 million tonne per year whereas the demand for copper is expected to reach 40 million tonne per annum by 2030. Clearly, the increased demand for copper has been a positive sign for the copper miners and investors. The price of copper on the London Metal Exchange is increased to US$6,367 per tonne from US$5,633 per tonne in May (McHugh, 2017). However, such massive demand for copper can create a scarcity of the resource if the supply-demand side of the red metal cannot be maintained properly. At the same point in time, a sudden rise in demand for copper may lead to the high price of the commodity affecting the market equilibrium price of the red metal (Hoog, Handberg and Jegatheesan, 2015). Therefore, the supply side of copper must be improved to control the massive price surge of the commodity. In the underlying section, the effect of the high demand for the commodity on the prices has been described using the theoretical concept of supply and demand. On the basis of the above analysis, it can be seen that the rising demand for the copper is the primary reason for the rise in the price of the metal that will further impact the cost of production of the automobile industry (Shao, Pipattanasomporn and Rahman, 2012). Moreover, it is expected that the price of the electric vehicles will increase in the upcoming future with the rise in the price of the red metal. A figure has been presented herein below for further understanding: Figure: Shift in demand and price of a commodity Source: (Forstater, 2017) As per the above diagram, it can be seen that the quantity demanded for copper is rising in the Australian as well as in the global market due to increased use of the metal in the manufacturing of electric vehicles or renewable energy devices. Due to the increase in the demand, a rightward shift in the demand curve can be evident in the market from D to D. However, the supply of the commodity remains constant at S, resulting in a rise in the quantity demanded from q to q. Furthermore, a shift in the market equilibrium can be evident that further results in an increase in the price of the red metal from p to p. According to Samuelson and Nordhaus (2015), the price elasticity of copper is inelastic in nature, which leads to a relatively lesser fall in the quantity demanded as compared to the rise in the price. A figure has been presented herein below for further consideration: Figure: Inelastic demand for copper Source: (Samuelson and Nordhaus, 2015) On the basis of the above figure, it can be seen that the price of copper increases by 100 percent, whereas the quantity demanded falls by only 20 percent. Hence, copper has an inelastic price elasticity of demand. A high level of increase in the price of the red metal will lead to shortage in the supply of the product in the upcoming future (Shao, Pipattanasomporn and Rahman, 2012). It is important for the government and the policy makers to control the supply of copper in the future to reduce the chances of tremendous increase in the price of the commodity. Firstly, it is recommended to the government to discover new resources of copper to increase the supply and control the increasing price of the commodity (Bouchentouf, 2011). Secondly, the government must introduce a price ceiling policy to monitor and control the price of the red mental to maintain equilibrium in the metal and automobile market. Conclusion By considering the above analysis, the increase in the demand for copper in the manufacturing of electric vehicles and electric power charging stations has led to a tremendous increase in the price of the commodity. It is expected that the rise in the demand will further led to a shortage in the supply of the red metal in the future due to inelastic demand of the commodity. Hence, it is recommended to the government to discover new reserves of copper to stabilise the supply of the commodity in the future and use a price ceiling policy to control the increasing price of the metal in the Australian market. References Bouchentouf, A. (2011).Commodities for dummies. 3rd ed. Hoboken, NJ: Wiley Pub. Forstater, M. (2017). Economics. 5th ed. London: A. C. Black. Hoog, J., Handberg, K. and Jegatheesan, R. (2015). The role of electric vehicles in demand response: implementation, network impacts and market requirements.International Journal of Electric and Hybrid Vehicles, 7(3), p.250. Krugman, P. and Wells, R. (2013). Economics. 2nd ed. New York, NY: Worth Publishers. McHugh, B. (2017).Copper demand up due to surge in electric vehicles and renewable energy targets. [online] ABC Rural. Available at: https://www.abc.net.au/news/rural/2017-08-15/copper-demand-and-price-up-on-electric-vehicle-demand/8799106 [Accessed Nov. 2017]. Samuelson, P. and Nordhaus, W. (2015). Economics. 4th ed. Boston: McGraw-Hill/Irwin. Schlesinger, B. (2014). Electric Vehicles: Electric Vehicles May Reduce Oil Imports While Stabilizing Grid.Natural Gas Electricity, 30(8), pp.18-22. Shao, S., Pipattanasomporn, M. and Rahman, S. (2012). Grid Integration of Electric Vehicles and Demand Response With Customer Choice.IEEE Transactions on Smart Grid, 3(1), pp.543-550.

The Concept of Wireless Networking and Computing †Free Samples

Question: Discuss about the Concept of Wireless Networking and Computing. Answer: The concept of Wireless Networking, Wireless Computing and Wireless Access Point may be known to people but what is exactly these Wireless Technologies depict. Network exists so that the data could be send from one to another place is what the basic concept of data communication stands for. With this kind of connection, all of these devices will be able to be controlled remotely and easily (Liang Yu, 2015). Our TV, refrigerator, Air Conditioner, even for some other things such as windows and door, will be able to be controlled via our personal device. Wireless network utilizes some specific equipment such as NICs Routers in place of wires like optical and copper (Hu Qian, 2014). Transmissions of data using electromagnetic waves in open space, carrying the information send/ received over a well defined frequency band channesls. Here, we are going to discuss the use of Wireless technologies and the way they enhances our daily life (De Judicibus et al., 2013). Explaining further the d ata communication components, possible wireless technologies used in various places. Data communications can be achieved through a process called network. For more cost saving and mobility wireless technologies were implemented. Wireless communication/Wireless networks have been used since 1876, and has been rapidly and widely used to develop wireless network computers (Sutaria et al., 2014). Wireless refers to the method of transferring information between computing devices such as PDA (Personal Data Assistant) and data sources like an agency database server without having a physical connection or wires. Wireless Technology transmits information generally by using radio waves without using cables or wiring. Data Standards of wireless communications include Bluetooth, WiMax and DECT (Chen et al., 2015). Examples of devices that are generally used as wireless technologies are RFID, Bluetooth, WirelessHD/WiGig, Satellites, Cellular, Wi-Fi based wireless LANs and WMAN. Implementation of applications of radio wireless technologies are GPS units, wireless computers, keybo ards, headsets, headphones, television broadcasts, etc. There are many advantages of using wireless technology for computer networks: 1. Mobility and 2, Cost-savings. Freely moving within home, office, business or city, maintaining a proper connection to other computers on the same network systems (Jiang et al., 2015) all these can be sorted by using a wireless network. Sometimes cabling can be expensive and long distance coverage gets tough, in difficult level terrains or in well established organization so it may save some considerable amount for using a wireless network instead in a suitable environment that is provided. Wide Area Networks (WANs) using wireless technology means one have to pay access to the existing telecommunications infrastructure. The radio spectrum is therefore divided into sub-bands which are based on each frequency range, suitable for the given sets of application. Suitability of the band can be determines the given frequencies by the functional process of the atmospheric propagation characteristics, as well as system aspects, like the required antenna size and power limitations. This Increases number of mobile radio communication systems used in our daily life. Door openers in garage, cordless telephones, remote controllers for home entertainment equipment, pagers, walkie-talkies, and mobile phones are all examples of mobile radio communication systems (Chen, 2013). However, the complexity, cost, performance and types of services offered by mobile systems are decreasing. Wi-Fi- Networks use the Radio Technologies to transmit and receive data at a high speed: IEEE 802.1lb, IEEE 802.1la and IEEE 802.1.lg Typical uses of wireless technologies include: Wireless access point for a home or small business to the internet for more than one desktops, tablets, mobile phone and laptops. Physically separate buildings such as mobile sites, farm buildings, business premises are linked via wireless networks. Public places Hotspots for restaurants, parks, hotels etc (Pathan, 2016). Wireless ISP infrastructure. Remote access to equipments like device controllers or remote sensors such as irrigation systems, self closing doors, temperature sensors, CCTV. Analyzing possible wireless technologies includes: RFID- Electromagnetic fields to identify and track tags attached to objects automatically by using Radio-frequency identification (RFID). RFID are attached to an object and are used to track and manage assets, people, electronic devices etc (Tan Wu, 2013). These are usually affixed over cars, computers, mobiles etc. Used in various other applications such as: Access management, Tracking of goods, Tracking of person and animals, Contactless payment, Airport Baggage tracking logistics, Tracking bills and processes, Human Identification, Institutions and Complement to barcode. Bluetooth- It is a kind of wireless technology that exchanges data over short distances by use of short-wavelengths from fixed or mobile devices building Personal Area Network (PAN) from wave length of 2.4 to 2.485 GHz. It is packet based protocol used in phones, laptops, tablets or any digital wireless device using the radio technology. Master BR/EDR Bluetooth devices can communicate with almost seven devices at a time. It is easy to access and user friendly. WirelessHD/WiGig- The Wireless Gigabit Alliance (WiGig) was a trade association that develops and promotes the adoption of multi-gigabit per second. Speeds up the wireless communication technology operating on unlicensed frequency band. This is used for wireless transmission of high-definition video content for consumer electronic products. The founder initially intended to use this technology for Consumer Electronic devices, PCs and portable devices (Khan Pathan, 2013). Satellite- Satellite wireless communication is artificial satellite relaying and amplifying radio telecommunication signals via transponders, creating communication channel within the different locations on the Earth by source transmitter and receiver. Telephonic application, televisions, Radio broadcasting, Radio transmission, Internet access and military access, some of the highly confidential information are transmitted using the satellite device for protection against hacking (Pathan, 2016). Cellular- Cellular network or mobile networks are commonly used communication network system. The network is then distributed over land areas knows as cells, each served by at least one transceiver that is fixed in location or base stations. This station provides network coverage which is used for transmission of voice data and other information. Cellular network offers some desirable features like: larger capacity the single transmitter, mobile devices uses less power and larger coverage area than single terrestrial transmitter. Wi-Fi-based wireless LAN- This links two or more devices within limited area like school, computer labs, office or at home. This makes flexible for users to roam around within the local area coverage and still be connected to the wider internet. There are four types of wireless LANs: Infrastructure, Peer-to-Peer, Wireless Distribution system and Bridge. WMAN- This is a wireless broadband used in wider areas like stations, airport, railway stations, giving access with identified security pass codes of the mobile (Stallings, Tahiliani, 2014). We can build our own wireless network system, all we need is: Computer- First need is devices and wireless-capable computers like wireless access points or routers. By the use of dedicated hardware we can build our own access point or router. Wireless card- Wireless expansion cards or wireless adapters can handle the processing of the data, which may be transmitted or received over some wireless networks. These card supports one or more of the 802.11 standards therefore has unusual characteristics regarding the used chipset, maximum output power, receive sensitivity, speed, etc. Antenna- Wireless computers can use the antennas to improve reception and transmission quality. Each antenna has radiation of descriptive pattern, with Omni-directional (360) which are commonly used. Antennas are directional or sectaries, with transmission and reception occurring in a narrower and more specific direction. Determination of the output power (EIRP) of a wireless device is by gain of an antenna with combination with output power of wireless cards (Jiang et al., 2015). Pigtail- Pigtail is necessary to connect wireless card to an antenna. Some pigtails can connect directly to the antenna by the wireless card, while some others connect from another pigtail to the antenna, allowing distant placement of the antenna from the given wireless card. Software- Software helps in running the wireless hardware. Some drivers are needed for wireless cards and a network-capable operating system. Finding a link to the driver for wireless cards and various other operating systems. Disadvantages of wireless communication are there still remains a safety issue regarding wireless devices since data loss is common during the transmission. Even the security of the data access is under attack by various unauthorized malicious cyber hackers and websites. And since there are no evidence regarding the health risk associated of using wireless devices in our daily life, it is wiser to be always aware of the concern and consequences that may cause damage (Pathan, 2016). The advantages of Wireless network system hence provide Mobility, Ease of installation, Flexibility, Costing, Security, Reliability, Roaming and Speed. Since the simplicity and the cost effective way that connects to internet without the requirement of wire, the wireless connection has grown wide and hence its impacts in our daily life. Freedom of users is hence prior to any industry or organization for the development and well being of the population (Tan Wu, 2013). So we conclude that use of wireless communication and some suitable protocols, installation and maintenance cost can be collectively reduced without degenerating the performance of the network system. And it provides the flexibility in the factory automation restructuring and planning. As in recommendation the best way for higher development in this wireless network system is to bring 5G wireless network system in use and reassure the security and safety for the public. The drawbacks can be overcome by the wireless 5G network which enhances the speed and security of the network system. 5G technology is trending in availability in the market on 2020 at affordable cost and with more facilities. The security of the network system has to be better. The encryption technology has to be larger as compared to 3G or $G technology because. Now a day cyber attack and hacking is major issue and because of this transmission gets tough as there is always a chance of data loss in the process of transmission. References Chen, L. (2013).Wireless network security. New York, Higher Educational Press. Chen, M., Zhang, Y., Hu, L., Taleb, T., Sheng, Z. (2015). Cloud-based wireless network: Virtualized, reconfigurable, smart wireless network to enable 5G technologies.Mobile Networks and Applications,20(6), 704-712. De Judicibus, D., Leopardi, S., Modeo, L., Pergola, N. (2013).U.S. Patent No. 8,352,360. Washington, DC: U.S. Patent and Trademark Office. Hu, R. Q., Qian, Y. (2014). An energy efficient and spectrum efficient wireless heterogeneous network framework for 5G systems.IEEE Communications Magazine,52(5), 94-101. Jiang, D., Xu, Z., Li, W., Chen, Z. (2015). Network coding-based energy-efficient multicast routing algorithm for multi-hop wireless networks.Journal of Systems and Software,104, 152-165. Khan, S., Pathan, A. K. (2013).Wireless networks and security. Berlin: Springer. Liang, C., Yu, F. R. (2015). Wireless network virtualization: A survey, some research issues and challenges.IEEE Communications Surveys Tutorials,17(1), 358-380. Pathan, A. S. K. (Ed.). (2016).Security of self-organizing networks: MANET, WSN, WMN, VANET. CRC press. Pathan, A. S. K. (Ed.). (2016).Security of self-organizing networks: MANET, WSN, WMN, VANET. CRC press. Stallings, W., Tahiliani, M. P. (2014).Cryptography and network security: principles and practice(Vol. 6). London: Pearson. Sutaria, J., Nanjundeswaran, S., Gustafson, B., Van Gent, R. (2014).U.S. Patent No. 8,831,561. Washington, DC: U.S. Patent and Trademark Office. Tan, C. C., Wu, J. (2013). Security in RFID networks and communications. InWireless Network Security(pp. 247-267). Springer Berlin Heidelberg.